The changes and the development in the China's auto parts industry are imminent
Developed by now, every piece of the profits of traditional shopkeeper in the China's auto parts industry market has been excavated and exhausted, non-standard operating advantage is gradually losing. Although it is painful for the traditional shopkeeper to transit to terminal peddler, the costs are enormous, and full of risk, but they will die if do not go to the terminal, which has become the consensus of the domestic auto industry. Traditional subaru outback parts market has been greatly compressed, the changes and the development in the industry are imminent.
The terminal market of auto parts industry will enter an era of fierce competition
The terminal market of auto parts industry will enter an era of fierce competition, individual enterprises will be subject to many constraints if they become bigger and stronger. First, the Chinese market is the feast of the international car dealers, the rapid growth of the automobile market does not leave enough time to the tender growth of the independent aftermarket, it will be very difficult for the enterprises to get bigger relying solely on their own. Secondly, traditional Chinese auto parts market based on decentralized management, norms cost is high, which is difficult to bring up the scale chain enterprises. Again, the newborn non-sizable independent aftermarket chain is difficult to contend with the powerful vehicle aftermarket system.
Auto parts enterprises must make up the lesson of the service
Clearly, the auto parts enterprises must make up the lesson of the service if they want to compete with the automobile companies in aftermarket. The independent aftermarket enterprises without strength are difficult to provide the services as well as the automobile companies. At the same time, any auto parts enterprises in the current independent aftermarket solely rely on their own, which do not have the strength to meet the requirements of the repair factory’s "full" requirement for auto parts. In addition, the strength of any single Subaru OEM auto parts companies is insufficient to establish a strong distribution system and cannot solve the stock pressure of terminal network to meet “full" auto parts” through timely delivery. The 2S shops whose car sales chain are vigorously developing are constantly diverting downstream of the auto parts enterprises –independent repair station's living space. Automobile companies have also launched the independent aftermarket authorization 2S shop to sell their own brand of auto parts, such as GM, FAW, SAIC and Toyota.
The competitive strength of the auto parts alliance enterprises will also be greatly increased
In addition, multinational auto parts giants also spent great efforts to build authorized brand repair plants to control the terminal, such as Bosch, Aisin Seiki. The international independent aftermarket auto parts chain enterprises also began to get involved in the independent automotive aftermarket in China, such as Germany's Cooper. Though the independent aftermarket auto parts enterprises are small, but the enterprises with different characteristics can achieve resource sharing, complementary advantages purpose through cooperation, the competitive strength of the alliance enterprises will also be greatly increased.
www.auto-bodyparts.net is concentrated on SUBARU exterior auto body parts' developing, producing, selling for almost 8 years, our items including bonnet, spoiler, side visor, front bumper guard, grille, roof luggage rack, door sill plate ,strut bar, carpet and some accessories about SUBARU car.
If you are interested in our products, please feel free to contact us!
0 Comments
Ceramic Enterprises Enter the Field of Solar Panels
Under the big environment of the transformation of economic growth mode and energy saving, the traditional architectural ceramics industry began to explore the extension of industrial chain, and that is the transition to a low carbon route. Solar is one of the extensions of the fields that the ceramic enterprises are more optimistic about in recent years. At present, many domestic ceramic production base bold step into the field of solar energy, and coincidentally spotted ceramic solar panel project, and they are ready to begin the scale production of household 500 watt solar panel. The Faku County in Liaoning Province, known as the Northeast Porcelain City” has rich clay resources, and since the 2002 the introduction of the first ceramic production line, it began to expand the resource advantages into industrial advantages of strategic offensive, making the ceramic industry rapidly grow. Energy Issues Promotes Industrial Development of Solar Panels The energy and environmental problems are the problem that the whole global is concerned about and have the urgent need to address. As the rapid energy consumption of conventional energy, coal, oil, natural gas and mining, at the same time, it also brings many environmental problems. Solar energy, as a clean energy, is the irreplaceable energy of conventional energy sources and renewable energy. The fundamental problem of direct use of solar energy is the problem of use of solar energy device manufacturing costs, energy costs, environmental costs and the use of the cost is high or low. Ceramic solar technology precisely can solve the issue of the utilization of solar energy device manufacturing costs, energy costs, environmental costs and the use cost. In 2009, ceramics solar panels finally came out of the lab and to meet with the world in Shandong, and from then on the 140w solar panel, one of the ceramic solar panels began to be used in a large number of small families. Insiders said that the ceramic solar panels is a revolutionary breakthrough in human field of new energy technology application and it fills the blank of the world ceramic solar industry and the energy industry. Prospects of Solar Panels Construction ceramics industry in China gets a huge achievement, but our country is a country relatively poor in energy and resources, and the construction ceramics industry is a high energy consumption industry, from the firing to the raw materials preparation to process fuel, electricity and other energy costs accounting for 23% ~ 40% of the entire ceramic production costs. In terms of building ceramics production, energy saving is the general trend of ceramic production. With the rapid development of the socio-economic and ceramic industry, ceramic industry waste is increasing, causing tremendous pressure on the urban environment. Currently, waste processing and utilization of China's ceramic industry is relatively low, the shortage of funds resulting in a large number of waste residue crowding of arable land, water and air contamination. It is precisely because of this that a lot of ceramic enterprises will fancy ceramic solar panel project. Low-carbon, energy-saving and environmental protection is precisely the biggest feature of the ceramic solar panels. So we can see that the market prospects of solar panels is large www.solarmodulesystem.com is a high-tech photovoltaic company specialized in the solar module, PV system project research, produce, sales and after sales service. Our products get VDE, SGS, CE, CSA and MCS international certificates. Welcome to visit our website! Prices of Imported Second-hand Excavator
Price of imported second-hand excavator is obviously not fixed. In fact, no matter what kind of commodities, their prices are not a long time fixed in the same position. Especially like the imported second-hand excavators, such products come from abroad, and its price is bound to be the impact of national policies as well as all aspects of the economy. Imported second-hand excavator has long been a focus of attention. Among them, the price of imported second-hand excavators each year is to be the focus of discussion topics. Price of imported second-hand excavator is high, even if the imported second-hand excavator parts are expensive. However, in opening-up policy as we gradually implemented, the price of imported second-hand excavator also changed. Compared with before, now imported second-hand excavator price is a very reasonable. After a period of time, the domestic and international economic exchanges will be more closely, the price of imported second-hand excavator. There must have room to decline. Cradle of Used Excavators Follow the pace of the times, the advancement of technology and the technology developed in the new machine foothold in the domestic market, more and more people is not optimistic about that, that is because the longer shelf life of some second-hand machines and the economic cycle cause the phenomenon, the occurrence of this phenomenon is also some new machine manufacturers attention to a certain extent, so some used equipment development for some second-hand machines, but also with the development of second-hand products marketing link, the invisible problem exposed by the instability of the transaction, the shoddy, so that people are not familiar with some of the second-hand excavator market shouted deceived slowly that they are covered with a layer of black armbands to people psychologically. At this point, the one does better is China used excavator market. How to Buy a Second-hand Excavator? Check the excavator engine parts to make sure they are in good conditions, when throttle, to see whether the digging machines work properly and whether the smoky sound is abnormal, and hold your breath. At big effort of the pump, the engine is idling, the fuselage from the top, not the top from the pump when no effort or top engine sounds unusual for the lack of engine power. Throttle stretching all cylinder listen to large pump voice changed. Do the chain link and plate detection. Dial left and right, up and down the clearance check, allowing around a little gap, but up and down to die. Look at the number of vehicle replacement tubing, the less prove more new cars. The normal throttle speed check. All cylinders should be checked for injuries. www.filtermanufacturers.net is one of the largest professional mechanical construction enterprises in China. Our company is specialized in producing, developing, and selling the whole range of Excavator Parts, such as all kinds of Filters, Alternators, Starters, Water Pumps, Cylinder Blocks, Cylinder Heads, Oil Covers, Oil Coolers, Oil Separators, Stepping Motors, Pistons & Piston Rings, Liners, Ignition Switches and Camshafts etc. Welcome to visit our website for more information! This article is come from: http://www.industrialmachinery4u.com/knowledge-of-used-excavators.htm Innovation in the aluminum industry
Innovative products is more likely to allow the market to accept, is more easily for customers to be interested in. The individual needs of the market are growing and enterprises should increase innovation in personalization, enhance competitiveness, to avoid being eliminated in a sluggish market. Plastic doors and windows enterprise should make efforts in embossing, brushing and coating to produce more attractive and higher-margin products. The lack of technology and the poor application of new technologies, resulting in China Aluminium Panels industry lack of the driving for the sustainable development, and the power to promote a long-term healthy development of the industry is always technology. The R & D costs and technical personnel in China aluminum sheet and aluminum coil enterprise are much lower than the number of the world's leading enterprise level, and the disregard of the technology and the lack of the technical staff have become an important factor restricting the development of China steel doors and windows enterprise. The status quo of the aluminum industry Too much attention on the price competition of aluminum doors and aluminum plate business result in the entire industry into a state of profit and loss, overdrafting the social resources, and are unable to carry out technology upgrades, to create a complete value chain. We should see the price competition is used to promote the development of Chinese plastic steel industry, but for the development of the industry, there are differences in the different stages of the push factors. Market crisis seriously affected the development of the industry, which leading to the phenomenon of product homogeneity is more and more serious. Therefore, some of the real estate business is in the choice of decoration products, but only treat the plastic doors and windows as low-end accessory products. The fierce competition in the aluminum industry Market competition is increasingly fierce, in order to maintain the sustainable development and produce the benefits, enterprises have to uphold the concept of "integrity". Meanwhile, enterprises should learn more about the market demand in the after-sales service and apply the perfect after-sales service to enhance product quality and brand value, and get a high degree of trust and recognition of the market. Strengthen the brand building and promotion is a priority. The long-term price war and the low innovative ability make the overall quality of the aluminum processing industry is not high, but also the plastic profiles, windows and doors enterprises obtain a poor reputation in the market. Reshape the image of the industry, improve product quality, enhance visibility, is in desperate need for every enterprise. All businesses do not put their sights above the price war, and we should join hands to create a specification, a healthy market environment. www.aluminiumpanel.com.cn is the only powerful, comprehensive and professional manufacturer of modern construction and decoration materials in South China. Our company mainly produces aluminium composite panel, aluminum curtain wall mono board, (embossed) coated aluminium coil, aluminium ceiling panel, plywood panel, fire retardant plywoodand adhesive. This article is come from: http://www.chinawoodenflooring.com/index.php/analysis-of-aluminum-panel-industry.htm "Security + money + comfortable + environmental protection":
First, safe: use no gas, and will produce neither emission, nor will there be a "gas poisoning"; and it is heated by the electric heating rods, there will be no risk of leakage, which will care more about the health and safety of family. Second, save money: the COP value exceeds 3 or more, high energy efficiency, and air source heat pump absolutely saves power and money, which can save 2/3 to 3/4 of the electricity costs and save 1/2 to 2/3 of gas expenses and solar water heaters in auxiliary heating costs. Third, comfort: patented technology - streaming indirect heating, automatic constant temperature pressure water supply, and it will be sudden hot or sudden cold in the process of using hot water, there is some pressure the hot water offering good comfort. The water supply all day round and all year round, which can make up the embarrassment of the solar hot water system that there is no hot water available in the days of cold, rainy, night and no sun. Fourth, environmental protection: the cold water discharged by the air (heat pump) heater is conducive to lower the room temperature. Why can air heat pump water heater save power? Compared to the coal-fired boiler, oil-fired boiler, gas boiler and electric water heaters, heat pump water heater is the water heater with the highest thermal efficiency. The efficiency of Oil-fired boiler is 65%-75%, the efficiency of heat pump water heater is 70%-80% and the efficiency of the heat pump is 300%-500%. Due to the thermal efficiency of hot water heat pump water is up to 300%-500%, the cost of producing water heater is low, which will naturally save power. Other heat pump products are also power-saving, but will not save a lot. Does the air heat pump water heater have other functions? Air (heat pump) water heater has the functions of providing hot water, heating, dehumidification, cooling, air purifiers and others. And it can provide a 24-hour continuous automatic hot water throughout the year regardless of rain and snow; It can dehumidify efficiently, and the maximum dehumidification capacity is 6 to 8 kg within the 24 hours a day, the effect is more obvious in the rainy day; The effect of filtering indoor air is more obvious when it is installed in the kitchen. It is equipped with the additional heating accessories, and it allows the temperature indoor up more than 5 ℃ in winter to make learning, entertainment, sleeping more comfortable. www.phnix-e.com has focused on the Research & Development and production of heat pumps since its inception. Now it can provide various solutions for energy saving such as house heating, sanitary and commercial hot water supplying, swimming pool thermostatic dehumifying and central air-conditioning integrated energy saving. This article is come form:http://www.soundspeakers.cn/index.php/the-advantages-of-air-heat-pump-water-heater.htm The role of PCB
In order to avoid the errors of artificial connection to achieve automatic insertion, welding and testing; ensure the quality and reliability of electronic machine products; improve labor productivity, reduce production costs; convenient maintenance and other conditions in the China pcb assembly. Therefore, the printed circuit board (PCB) is used in the electronic machine equipment. Specifically there are the following three major roles: First, offer the function of parts welding solder graphics; PCB provides solder graphics for the components welding and identification character checks and cartridge for parts repairmen; Second, the wire links to the parts; PCB can achieve the connection between the various parts and electric or electrical insulation, and can provide the required electrical characteristics, such as a high-frequency microwave signal transmission and the characteristic impedance; Third, the function of supporting the parts; offer the assembly of the various components (such as resistors, integrated circuits, capacitors, etc.), and the fixed mechanical support. The application of PCB PCB (printed circuit board) has a very wide range of the use, and can be used in almost all electronic equipments, both can be used in the computer mouse and the mobile phone and be used in the car and on the rocket. But it is mainly used in the following ranges: First, computer and peripheral products: monitor, host, server, such as a mouse; Second, Communications products: cell phone, home landline, satellite, etc. Third, consumer electronics products: refrigerator, microwave, air conditioning, etc. Fourth, Industrial Products: punching machines, motors, etc. Fifth, others: military weapons, rockets, etc. China's sustained and rapid development of electronic communications production is an important guarantee of the rapid development of printed circuit continued production. PCB manufacturer China has sustained the annual growth of more than 20% of the speed in the last decade. Not only production output value will become the world's second largest after Japan and the product quality is also rising, developing from the middle and low to high-grade level. High multilayer the HDI board and flexible circuit boards are in rapid development. The development of PCB industry in China In order to strive to improve in the international competition, one of the most important things for Chinese enterprises to carry out is to introduce the situation and development of the world's electronic circuit more timely, in particular, to be more systematic introduction of the latest technology, materials, equipment and trends of modern printed circuit, including raw and auxiliary materials and special equipment such as copper clad board, so that enterprises can quickly understand and keep up with the world trend. www.pcb-pcba.cn has more than 10 years experiences in the PCBs industry; our products include sigle-dide, double –side board, multilayer boards (1-20layers), High-density multilayer PCBs and Aluminum based PCB. Various material coating form Neclo and rogers, as well as CEM-1, CEM-3.FR4, halogen –free and PTFE aluminum base type and more. We also offer high –frequency and copper boards. This article is come from: http://www.mobilesaccessories.net/index.php/application-and-function-of-pcb.htm The International Road of Chinese Denim
"The world's denim settles in China, and Chinese denim settles in Xintang." In China, the each ten jeans exported to all over the world, 4 of them are manufactured in Xintang. The "gateway to the world" - the slogan of the Italian fashion design port showed on scene located in Xintang, Guangdong Province, China, and this slogan leave impressive impression for the people come here. The officially launched Chinese - Italian fashion design port is an open public service platform, a studio for the exclusive use by the Italian designer, to release the latest works of the exhibition center, network information center of the global apparel trend will provide the denim costume design, pattern design, image design, professional consulting, services and outsourcing diversified services for Xintang, Zengcheng, Guangdong, China. – With the setting sail of Italian fashion design port (Xintang), marking cooperation in the areas of brand development, creative design, R & D, talent exchange has entered a stage of high-level update development. Transformation Assist Denim Industry Rise against Wind Xintang denim industry step a solid pace from "manufacturing" to "creating" in the critical transformation and upgrading. Here gradually formed a consensus: to promote the transition to creative design, invisible wings to plug in the denim industry. The leap-forward development of Xintang denim industry also brings many Chinese wholesale fabric suppliers the unlimited business opportunities. Enhanced between Xintang Jeans R & D design, brand marketing, fashion and Milan cultural functions by such international creative design and fashion culture are interactive, Italy, apparel Cultural Park through the construction of clothing design platform to expedite the implementation of denim garment industry transformation and upgrading, thus promoting urban transformation and upgrading. New Technology Leads the Denim Ecological Civilization Without water and chemical additives G2 color (rinsing) processor, especially suitable for the use of SMEs like sewage treatment equipment such as washing machines the size of a removable top international digitization jeans sewing professional equipment. In the First Guangzhou Zengcheng International Textile and Garment Advanced Equipment Exhibition, the advanced denim clothing and equipment make the Zengcheng denim clothing practitioners amazed again and again, these state-of-the-art equipment, technical maturity and cost have been merchants can accept the range to make denim fabric production perfectly placed to become a green manufacturing. Promote the use of advanced equipment, to subvert the people's impression of the clothing manufacturing industry, the apparel production industry technology and equipment upgrades can become a green manufacturing industry, in the creation of wealth, while also creating ecological civilization, and it should be vigorously promoted. www.Chinesefabrics.net is by far the sole southern R & D base of China's fashion fabrics authorized by China National Textile Industry Council, as well as the second largest industrial park in Nanhai district. We are specialized in the R & D, production and sales of chemical fabric , suiting fabric, jacquard fabric, and denim fabric. Welcome to visit our page for more details! This article is come from:http://www.handbagmanufacturer.com.cn/index.php/an-international-wind-is-sweeping-xintang-denim-industry.htm The factors affecting the cable accessories quality are diverse, and there are the following aspects in principle:
First, the electrical performance: The quality of electrical performance is the first principle of judging the quality of cable accessories. We have to mainly consider whether the electric field distribution of cable accessories is reasonable, whether the measures to improve the electric field distribution are appropriate and the electrical strength of the material, dielectric loss and insulation. At the same time, we have to consider the stability of the electrical properties, including the chemistry, physical properties and structure stability of cable accessories materials, such as the cable sleeve, such as whether the stress control material performance is stable, whether the stress cone is easy to deform, the effects caused by the cable insulation retraction of the electric field of cable accessories distribution and preventive measures, the combination of various materials compatibility, stability, etc. and the combination of the performance of the interface. In addition, we should also consider the thermal properties, such as dielectric loss, the conductor connecting the contact resistance of its stability, release of the heat conduction, the thermal expansion and contraction of the influence of the electrical properties and mechanical properties of the various components of cable attachment. Second, the sealing performance: The seal moisture resistant can directly impact on the performance and service life of electrical cable accessories. A sealing structure of the terminal is reliable and stable. In general, the middle connector should be a matched metal moisture-proof enclosure, buried or used in a wet environment. Third, the mechanical properties: Terminal should have sufficient ability to resist bending and shock. The middle joints (power supply cable sleeving) should be able to withstand a certain amount of tension and measures to prevent external damage. Fourth, process performance: Process performance is an important condition for the design and selection of cable accessories, the installation process should be as simple as possible, to facilitate on-site construction with short construction period; and the requirements on the on-site environment and the technical level of workers are not high, furthermore, the installation quality is easily controlled, and the quality is reliable. Fifth, the quality of manufacturer assures the system. Before the preformed cable accessories going out of the factory, as the rubber preform prefabricated stress cone, porcelain sheath, shell, dipping and the other parts provided by the manufacturer are assembled into the overall terminal or connector when installed in the field, therefore, manufacturing quality and workmanship of each of parts directly are related to the final quality of the product. www.cable-sleeving.com Our products mainly include: glass fiber products, silica gel products, woven casing products, PVC casing products, cable sleeves, seal extrusion products, wires, insulation paper and other insulation related products. All of our products have passed certifications of UL and environmental quality, and our factory has passed ISO9001: 2008 certification. This article is come from: http://www.ithardware4u.com/factors-affecting-the-quality-of-cable-accessories.htm Quality of a variety of decorative panels varies greatly
Decorative panels can be divided into blockboard, plywood, fiberboard, calcium plastic board, MDF, melamine board. More common wood choice is fir, fir material is loose and light, easy to dry, easy to process, cut rough, medium strength, easy to split, good stalemate performance. We need to use a lot of decorative panels in decoration. The quality of a variety of decorative wall panels on the market varies greatly. Make sure to pay attention to the following points when you choose: 1. Recognize the artificial veneer and natural wood veneer distinction: the texture of the former is basic straight texture, texture pattern is regular; while the latter is a natural wood pattern, texture pattern natural variability is relatively large, irregular. 2. Decorative performance: The appearance of the decorative panels should have a better sense of beauty; the material should be fine uniform, clear color. The texture of wood grain is beautiful, the supporting board and parquet should be arranged according to certain laws, similar wood color, the edge of the patchwork almost parallel to the board. 3. No obvious flaws on the surface: The decorative board surface should be smooth, no burr, grooves or tool marks; no glue penetration phenomenon and the plate surface contamination phenomena (such as turn yellow, black phenomenon in local part); try to pick the interior wall panels with crack-free surface, no cracks, no knots, bark, resin capsule, and gum canal; Nature warpage of the entire board should be as small as possible, to avoid the sand substrate revealed sand permeability phenomenon due to improper operation of the sanding process. 4. Layer structure is stable, no glue open phenomenon: It should be noted that there should have no drum kits, stratification between the surface veneer and substrate, inside the substrate layers. 5. The bonding strength test: Pry with a knife. This method is the most intuitive way to test the bonding strength, pry open with a sharp flat blade along the adhesive layer, if the adhesive layer is destroyed, and timber is damaged, indicating poor bonding strength. 6. Select plate with low formaldehyde emission: decorative plate with the pungent odor should be avoided. Because the larger the smell, the higher the formaldehyde emission, pollution is more powerful, and the danger is greater. 7. Select the products with expressly production enterprises: the vast majority of products with clear factory name, site, trademarks, its performance is good, consumers can priority select. www.3dwalldecor.net is specialized in producing 3D decorative wall panels. Our 3D wall panels have hard texture, fashion appearance and moisture proof and fire resistant etc concerned standard appearance advantages. It can completely meet the different levels of modern, individual, eco-friendly and life enjoyable consume requests. This article is come from: http://www.buildingmaterial4u.com/notes-for-decorative-panels-purchase.htm Type inspection approval
Type inspection for certification purposes, is to test one or more representative samples produced by the certification agents, and we can prove whether the tested samples are in compliance with the corresponding standards through a series of tests and reasonable evaluation process. It is an important part of the product safety certification. The number of test samples required is determined by the certification body in accordance with the requirements of the laboratory testing. Sampling sites were randomly selected from the manufacturer of the final products. The type inspection must be carried out by the independent inspection agency approved by the State or CQC, such as ccic inspection. The assessment of the quality system (environmental systems) In order to ensure the quality of the product continue to meet the requirements of the standard, enterprise must establish a quality management system in accordance with the specific situation of enterprises. Rely solely on the certification of the product to the final product sampling is incomplete. Even the sampling based on the statistics can only prove that the quality of a product batch, while cannot prove that the production of manufactured products consistently meet standard requirements. Inspection and assessment of enterprise quality management system shows that the business has a steady production of the products to meet the standard requirements, and a practical method is proved by practice. Supervision and inspection When the products have been certificated, how to maintain the stability of the product quality and safety to keep the production of plant products consistently meet standard requirements is the important issue, so the supervision and inspection must be carried out in the certified products on a regular basis. Supervision Inspection is to take samples from the producers of the final product or market to be tested by a recognized by inspection company. If test results meet the requirements of the standard, and are allowed to continue using the mark; if the test results do not meet the requirements of the standard, you need to take the necessary measures according to the specific circumstances to prevent the certification mark on the product which does not meet the standard. Supervision and inspection cycle is generally once a year. Supervision and inspection is to regularly review on the quality assurance ability of the production enterprises to enable enterprises to adhere to the implementation of the quality system which has been established, so as to ensure the stability of product quality. Supervision and inspection are easier than the first time, and the system put emphasis on whether the non-conformity has been effectively corrected and whether the quality (Environment) system modifications meet quality and environmental indicators requirements. www.ccic-shenzhen.com is an independent third party certification and inspection organization dedicated to providing inspection, verification, certification and testing services, with accreditation by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China(AQSIQ), Certification and Accreditation Administration of the People's Republic of China(CNCA) and China National Accreditation Service for Conformity Assessment(CNAS). This article is come from: http://www.ithardware4u.com/classification-of-product-inspection.htm |